{"title":"Green Stuff World","description":"\u003ch2\u003e Green Stuff World – Model making \u0026amp; hobby supplies for creative projects\u003c\/h2\u003e\n\n\u003cp\u003e\n \u003cstrong\u003eGreen Stuff World\u003c\/strong\u003e is one of the most versatile manufacturers of model building, crafting, and tabletop accessories. Their product range offers everything you need for conversions, terrain projects, dioramas, basher-heavy armies, or special effects. From tools and textures to unique specialty materials, Green Stuff World provides professional solutions for hobbyists who want to unleash their creativity to the fullest.\n\u003c\/p\u003e\n\n\u003cp\u003e \nOur product range includes \u003cstrong\u003ehobby tools\u003c\/strong\u003e , \u003cstrong\u003ebasing materials\u003c\/strong\u003e , \u003cstrong\u003epaints and effect paints\u003c\/strong\u003e , \u003cstrong\u003eUV resins\u003c\/strong\u003e , \u003cstrong\u003erollers and texture sticks\u003c\/strong\u003e , \u003cstrong\u003emagnets\u003c\/strong\u003e , \u003cstrong\u003ecutting mats\u003c\/strong\u003e , \u003cstrong\u003egrass tufts\u003c\/strong\u003e , \u003cstrong\u003ebits\u003c\/strong\u003e , \u003cstrong\u003emixing media\u003c\/strong\u003e , and much more. The products are ideal for conversions, kitbashing, terrain building, and miniature finishing. Texture rollers, thermoplastic materials, special effects, and high-quality tools are especially popular.\n\u003c\/p\u003e\n\n\u003cp\u003e\n At the \u003cstrong\u003eRadaddel Tabletop Shop\u003c\/strong\u003e you'll find a wide selection of \u003cstrong\u003eGreen Stuff World\u003c\/strong\u003e products for miniatures, model making, and terrain building projects. Perfect for hobbyists who want to achieve professional results and fully unleash their creative ideas.\n\u003c\/p\u003e\n\n","products":[{"product_id":"silikon-fuhrungsringe","title":"Silicone guide rings","description":"\u003ch2\u003eSilicone guide rings\u003c\/h2\u003e\n\u003cp\u003eSilicone guide rings\u003c\/p\u003e\n\u003cp\u003eThe quickest and easiest way to ensure an even thickness of putty and clay when using a texture roller.\u003c\/p\u003e\n\u003cp\u003eSimply place the silicone rings of your required putty or clay thickness onto both ends of the roller, then roll until the guide rings touch the work surface.\u003c\/p\u003e\n\u003cp\u003eWorks with a 25mm diameter roller.\u003c\/p\u003e\n\u003cp\u003eRing height:\u003cbr\u003e2 mm\u003cbr\u003e4 mm\u003cbr\u003e5 mm\u003c\/p\u003e\n\u003cp\u003eThis set contains a total of 3 pairs of silicone rings.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018091507955,"sku":"124289","price":3.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124289-silikon-fuhrungsringe-gs-1444-1.webp?v=1781203365"},{"product_id":"mega-strukturwalze-pflaster","title":"Mega Textured Roller - Paving","description":"\u003ch2\u003eMega Texture Roller - Paving\u003c\/h2\u003e\n\u003cp\u003eMega Texture Roller - Paving\u003c\/p\u003e\n\u003cp\u003eTexture rollers with which a permanent repeated pattern can be embossed on clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-puncturing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 32 cm\u003cbr\u003eDiameter: 3cm\u003cbr\u003eStone size of the pattern: 4x4mm\u003c\/p\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018091540723,"sku":"124290","price":18.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124290-mega-strukturwalze-pflaster-gs-1476-1.webp?v=1781203370"},{"product_id":"mega-strukturwalze-kopfsteinpflaster","title":"Mega textured roller - cobblestones","description":"\u003ch2\u003eMega Texture Roller - Cobblestone\u003c\/h2\u003e\n\u003cp\u003eMega Texture Roller - Cobblestone\u003c\/p\u003e\n\u003cp\u003eTexture rollers with which a permanent, repeating pattern can be impressed on clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 32 cm\u003cbr\u003eDiameter: 3 cm\u003cbr\u003ePattern size: 5x10 mm (variable with several cobblestone types, all different)\u003cbr\u003eRecommended scales: 1\/22 - 1\/32 - 1\/35 - 1\/43 - 1\/48\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling clay properly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling clay. For best results, smooth the material. We recommend using a flat, unstructured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking.\u003cbr\u003e4. - Move the roller with consistently even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model along with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will slightly resemble the smell of toast.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be fired, but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the material with a little water before impressing the texture.\u003cbr\u003eThe stickiness of Green Stuff can also be reduced with talcum powder, or even directly applied modeling petroleum jelly (LINK).\u003cbr\u003eOther epoxy putties, e.g. Milliput modeling clays, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the material should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018091606259,"sku":"124291","price":20.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124291-mega-strukturwalze-kopfsteinpflaster-gs-1477-1.webp?v=1781203373"},{"product_id":"mega-strukturwalze-rollstab-glatt-30mm","title":"Mega Texture Roller - Smooth Roller Bar 30mm","description":"\u003ch2\u003eMega Texture Roller - Smooth Rod 30mm\u003c\/h2\u003e\n\u003cp\u003eMega Texture Roller - Smooth Rod 30mm\u003c\/p\u003e\n\u003cp\u003eGlass-like thermoplastic material, for kneading putties and polymer pastes.\u003c\/p\u003e\n\u003cp\u003eLength 32 cm\u003cbr\u003eThickness 3 cm\u003c\/p\u003e\n\u003cp\u003eVery practical for achieving a smooth and uniform surface, and easy to clean. They are especially useful for fine surfaces such as banners, fabrics, capes, etc. If the modeling material is, for example, Green Stuff, it is advisable to use talcum powder and plenty of water to alter its properties and achieve great results. The talcum powder prevents fingerprints on the Green Stuff during handling.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND MAINTENANCE:\u003cbr\u003eAfter working with the modeling rollers, use a toothbrush and plenty of water to clean any residue from the rollers if necessary, and do not use wire brushes or metal tools, as this can damage them.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be supervised by an adult when using the rollers.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018091671795,"sku":"124292","price":18.2,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124292-mega-strukturwalze-rollstab-glatt-30mm-gs-1474-1.webp?v=1781203379"},{"product_id":"strukturierte-walze-mit-griff-pflastersteine","title":"Textured roller with handle - paving stones","description":"\u003ch2\u003eTextured Roller With Handle - Cobblestones\u003c\/h2\u003e\n\u003cp\u003eTextured Roller With Handle - Cobblestones\u003c\/p\u003e\n\u003cp\u003eTextured roller with handle that can press a continuous, repeating pattern onto all types of modeling putties, polymer clays, and pastes.\u003cbr\u003eMade of clear PMMA plastic with amazing non-stick properties.\u003c\/p\u003e\n\u003cp\u003eThanks to their small size and the innovative design of their ergonomic handle, they are easy to transport and use.\u003c\/p\u003e\n\u003cp\u003eVarious textures are available, making them compatible with different modeling scales. The textures are scalable to cover large areas, and thanks to their handle, they allow for embossing textures that create curves to add more realism to the model or base.\u003c\/p\u003e\n\u003cp\u003eRoller width: 4 cm (1.5 inches)\u003cbr\u003eRoller length with handle: 14 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003cbr\u003eScale: 54mm-Military (1\/35-1\/32)\u003c\/p\u003e\n\u003cp\u003e* The textured rolling pins and their handles are supplied unassembled.\u003cbr\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay, modeling compounds, thoroughly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay, modeling compounds. For best results, smooth the mass. \u003cstrong\u003e* We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking.\u003cbr\u003e4. - Move the roller with uniform pressure at specific points to ensure a continuous texture.\u003cbr\u003e5. - Cut off the excess material at the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eGenerally, modeling with these rolling pins and polymer clay (Fimo or Sculpey type) is quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will only slightly smell like toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the mass with some water before embossing the texture.\u003cbr\u003eTalcum powder, or even modeling petroleum jelly applied directly, can also reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, such as Milliput \/ Magic Sculpt \/ Aves Apoxie Sculpt modeling compounds, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput seems too sticky, the mass should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND MAINTENANCE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of a responsible adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018091737331,"sku":"124294","price":8.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124294-strukturierte-walze-mit-griff-pflastersteine-gs-10496-1.webp?v=1781203382"},{"product_id":"strukturierte-walze-mit-griff-kleine-pflastersteine","title":"Textured roller with handle - Small paving stones","description":"\u003ch2\u003eTextured Rolling Pin With Handle - Small Cobblestones\u003c\/h2\u003e\n\u003cp\u003eTextured Rolling Pin With Handle - Small Cobblestones\u003c\/p\u003e\n\u003cp\u003eTextured rolling pin with handle that can press a continuous, repeating pattern on all types of modeling putty, polymer clays, and pastes.\u003cbr\u003eMade of clear PMMA plastic with amazing non-stick properties.\u003c\/p\u003e\n\u003cp\u003eThanks to their small size and the innovative design of their ergonomic handle, they are easy to transport and use.\u003c\/p\u003e\n\u003cp\u003eVarious textures are available, making them compatible with different modeling scales. The textures are scalable to cover large areas, and thanks to their handle, they allow for embossing textures that create curves to add more realism to the model or base.\u003c\/p\u003e\n\u003cp\u003eRoller width: 4 cm (1.5 inches)\u003cbr\u003eRoller length with handle: 14 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003cbr\u003eScale: 28-32mm (1\/64-1\/48)\u003c\/p\u003e\n\n\u003cp\u003e* The textured rolling pins and their handles are supplied unassembled.\u003cbr\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay, modeling compounds, correctly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread the putty\/clay, modeling compounds, out. For better results, smooth the material. \u003cstrong\u003e* We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent sticking.\u003cbr\u003e4. - Move the roller with uniform pressure at points to ensure a continuous texture.\u003cbr\u003e5. - Cut off the excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the correct technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model together with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will lightly smell reminiscent of toast.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the material with some water before embossing the texture.\u003cbr\u003eAlso, talcum powder, or even modeling petroleum jelly applied directly, can reduce the stickiness of the Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput \/ Magic Sculpt \/ Aves Apoxie Sculpt modeling compounds, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the material should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with scratching brushes and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of a responsible adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018091901171,"sku":"124295","price":8.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124295-strukturierte-walze-mit-griff-kleine-pflastersteine-gs-10495-1.webp?v=1781203385"},{"product_id":"strukturierte-walze-mit-griff-pflastersteine-15mm","title":"Textured roller with handle - paving stones 15mm","description":"\u003ch2\u003eTextured Roller with Handle - Cobblestones 15mm\u003c\/h2\u003e\n\u003cp\u003eTextured Roller with Handle - Cobblestones 15mm\u003c\/p\u003e\n\u003cp\u003eTextured Roller with Handle that can press a continuous, repeating pattern onto all types of modeling putties, polymer clays, and pastes.\u003cbr\u003eMade from clear PMMA plastic with amazing non-stick properties.\u003c\/p\u003e\n\u003cp\u003eThanks to their small size and the innovative design of their ergonomic handle, they are easy to transport and use.\u003c\/p\u003e\n\u003cp\u003eVarious textures are available, making them compatible with different modeling scales. The textures are scalable to cover large areas, and thanks to their handle, they allow for embossing textures that create curves to add more realism to the model or base.\u003c\/p\u003e\n\u003cp\u003eRoller width: 4 cm (1.5 inches)\u003cbr\u003eRoller length with handle: 14 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003cbr\u003eScale: 15-20mm (1\/87-1\/72)\u003c\/p\u003e\n\u003cp\u003e* The textured rolling pins and their handles are presented unassembled.\u003cbr\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay, modeling compounds, properly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay, modeling compounds. For best results, smooth the compound. \u003cstrong\u003e* We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent sticking.\u003cbr\u003e4. - Move the roller with uniform pressure at points to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material on the sides with a sharp knife. We recommend allowing the material to dry beforehand.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eUsually, modeling with these rolling pins and polymer clay (Fimo or Sculpey type) is quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model along with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will slightly smell like toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the compound with a little water before impressing the texture.\u003cbr\u003eTalcum powder, or even directly applied modeling petroleum jelly, can also reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput \/ Magic Sculpt \/ Aves Apoxie Sculpt modeling compounds, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the compound should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND MAINTENANCE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of a responsible adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018091966707,"sku":"124296","price":9.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124296-strukturierte-walze-mit-griff-pflastersteine-15mm-gs-10494-1.webp?v=1781203388"},{"product_id":"strukturierte-walze-mit-griff-steinfliesenboden","title":"Textured roller with handle - stone tile floor","description":"\u003ch2\u003eTextured Rolling Pin with Handle - Stone Tile Floor\u003c\/h2\u003e\n\u003cp\u003eTextured Rolling Pin with Handle - Stone Tile Floor\u003c\/p\u003e\n\u003cp\u003eTextured rolling pin with handle that can imprint a continuous, repeating pattern on all kinds of modeling putties, polymer clays, and pastes.\u003cbr\u003eMade of clear PMMA plastic with amazing non-stick properties.\u003c\/p\u003e\n\u003cp\u003eThanks to their small size and the innovative design of their ergonomic handle, they are easy to transport and use.\u003c\/p\u003e\n\u003cp\u003eVarious textures are available, making them compatible with different modeling scales. The textures are scalable to cover large areas, and thanks to their handle, they allow for embossing textures that create curves to add more realism to the model or base.\u003c\/p\u003e\n\u003cp\u003eRoller width: 4 cm (1.5 inches)\u003cbr\u003eRoller length with handle: 14 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003cbr\u003eScale: 54mm-Military (1\/35-1\/32)\u003c\/p\u003e\n\u003cp\u003e* The textured rolling pins and their handles are supplied unassembled.\u003cbr\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Properly mix the putty\/clay, modeling compounds, until ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay, modeling compounds. For best results, smooth the material. \u003cstrong\u003e* We recommend using a smooth rolling pin, without texture, for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the rolling pin to prevent sticking.\u003cbr\u003e4. - Move the rolling pin with consistently even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off the excess material at the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eUsually, modeling with these rolling pins and polymer clay (Fimo or Sculpey type) is quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will subtly emit a scent reminiscent of toast.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage with these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the rolling pin or the material with a little water before imprinting the texture.\u003cbr\u003eAlso, talcum powder, or even modeling petroleum jelly applied directly, can reduce the stickiness of the Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput \/ Magic Sculpt \/ Aves Apoxie Sculpt modeling compounds, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the material should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND MAINTENANCE:\u003cbr\u003eAfter using the rolling pin, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of a responsible adult when using the product.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018091999475,"sku":"124297","price":8.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124297-strukturierte-walze-mit-griff-steinfliesenboden-gs-10493-1.webp?v=1781203391"},{"product_id":"strukturierte-walze-mit-griff-hollandische-ziegel-15mm","title":"Textured roller with handle - Dutch brick 15mm","description":"\u003ch2\u003eTextured Rolling Pin With Handle - Dutch Bricks 15mm\u003c\/h2\u003e\n\u003cp\u003eTextured Rolling Pin With Handle - Dutch Bricks 15mm\u003c\/p\u003e\n\u003cp\u003eTextured rolling pin with handle that can press a continuous, repeating pattern onto all types of modeling putty, polymer clays, and pastes.\u003cbr\u003eMade from clear PMMA plastic with amazing non-stick properties.\u003c\/p\u003e\n\u003cp\u003eThanks to their small size and the innovative design of their ergonomic handle, they are easy to transport and use.\u003c\/p\u003e\n\u003cp\u003eVarious textures are available, making them compatible with different modeling scales. The textures are scalable to cover large areas, and thanks to their handle, they allow embossing textures that create curves to add more realism to the model or base.\u003c\/p\u003e\n\u003cp\u003eRoller width: 4 cm (1.5 inches)\u003cbr\u003eRoller length with handle: 14 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003cbr\u003eScale: 15-20mm (1\/87-1\/72)\u003c\/p\u003e\n\u003cp\u003e* The textured rolling pins and their handles are supplied unassembled.\u003cbr\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay, modeling compounds, thoroughly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay, modeling compounds. For better results, smooth the mass. \u003cstrong\u003e* We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent sticking to the roller.\u003cbr\u003e4. - Move the roller with punctual, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model together with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will lightly smell reminiscent of toast.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage with these materials is that they do not need to be baked, but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the mass with a little water before impressing the texture.\u003cbr\u003eTalcum powder, or even directly applied modeling petroleum jelly, can also reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput \/ Magic Sculpt \/ Aves Apoxie Sculpt modeling compounds, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the mass should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of a responsible adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092032243,"sku":"124298","price":8.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124298-strukturierte-walze-mit-griff-hollandische-ziegel-15mm-gs-10488-1.webp?v=1781203394"},{"product_id":"strukturierte-walze-mit-griff-steinfliesenboden-15mm","title":"Textured roller with handle - stone tile flooring 15mm","description":"\u003ch2\u003eTextured Rolling Pin with Handle - Stone Tile Floor 15mm\u003c\/h2\u003e\n\u003cp\u003eTextured Rolling Pin with Handle - Stone Tile Floor 15mm\u003c\/p\u003e\n\u003cp\u003eTextured rolling pin with handle that can press a continuous, repeating pattern onto all types of modeling putty, polymer clays, and pastes.\u003cbr\u003eMade from clear PMMA plastic with amazing non-stick properties.\u003c\/p\u003e\n\u003cp\u003eThanks to their small size and the innovative design of their ergonomic handle, they are easy to transport and use.\u003c\/p\u003e\n\u003cp\u003eVarious textures are available, making them compatible with different modeling scales. The textures are scalable to cover large areas, and thanks to their handle, they allow for embossing textures that create curves to add more realism to the model or base.\u003c\/p\u003e\n\u003cp\u003eRoller width: 4 cm (1.5 inches)\u003cbr\u003eRoller length with handle: 14 cm (5.5 inches)\u003cbr\u003eDiameter: 2'5 cm (1 inch)\u003cbr\u003eScale: 15-20mm (1\/87-1\/72)\u003c\/p\u003e\n\u003cp\u003e* The textured rolling pins and their handles are supplied unassembled.\u003cbr\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay, modeling compounds, correctly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay, modeling compounds. For best results, smooth the compound. \u003cstrong\u003e* We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent sticking.\u003cbr\u003e4. - Move the roller with consistent pressure at points to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model along with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will slightly smell like toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the compound with some water before embossing the texture.\u003cbr\u003eTalc powder, or even directly applied modeling petroleum jelly, can also reduce the stickiness of the Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput \/ Magic Sculpt \/ Aves Apoxie Sculpt modeling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the compound should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with scratching brushes and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of a responsible adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092065011,"sku":"124299","price":8.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124299-strukturierte-walze-mit-griff-steinfliesenboden-15mm-gs-10491-1.webp?v=1781203397"},{"product_id":"strukturierte-walze-mit-griff-hollandische-ziegel","title":"Textured Roller with Handle - Dutch Bricks","description":"\u003ch2\u003eTextured Rolling Pin with Handle - Dutch Bricks\u003c\/h2\u003e\n\u003cp\u003eTextured Rolling Pin with Handle - Dutch Bricks\u003c\/p\u003e\n\u003cp\u003eTextured rolling pin with handle that can press a continuous, repeating pattern on all types of modeling putties, polymer clays, and pastes.\u003cbr\u003eMade of clear PMMA plastic with amazing non-stick properties.\u003c\/p\u003e\n\u003cp\u003eThanks to their small size and the innovative design of their ergonomic handle, they are easy to transport and use.\u003c\/p\u003e\n\u003cp\u003eVarious textures are available, making them compatible with different modeling scales. The textures are scalable to cover large areas, and thanks to their handle, they allow for embossing textures that create curves to add more realism to the model or base.\u003c\/p\u003e\n\u003cp\u003eRoller width: 4 cm (1.5 inches)\u003cbr\u003eRoller length with handle: 14 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003cbr\u003eScale: 54mm-Military (1\/35-1\/32)\u003c\/p\u003e\n\u003cp\u003e* The textured rolling pins and their handles are supplied unassembled.\u003cbr\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay, modeling compounds, correctly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay, modeling compounds. For best results, smooth the material. \u003cstrong\u003e* We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent sticking.\u003cbr\u003e4. - Move the roller with uniform pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off the excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model together with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will smell faintly of toast.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the material with a little water before impressing the texture.\u003cbr\u003eAlso, talcum powder, or even directly applied modeling petroleum jelly, can reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, such as Milliput \/ Magic Sculpt \/ Aves Apoxie Sculpt modeling compounds, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the material should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of a responsible adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092097779,"sku":"124300","price":8.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124300-strukturierte-walze-mit-griff-hollandische-ziegel-gs-10490-1.webp?v=1781203400"},{"product_id":"strukturierte-walze-mit-griff-kopfsteinpflaster","title":"Textured roller with handle - cobblestones","description":"\u003ch2\u003eTextured Rolling Pin with Handle - Cobblestone\u003c\/h2\u003e\n\u003cp\u003eTextured Rolling Pin with Handle - Cobblestone\u003c\/p\u003e\n\u003cp\u003eTextured rolling pin with handle that can imprint a continuous, repetitive pattern on all types of sculpting putties, polymer clays, and pastes.\u003cbr\u003eMade from clear PMMA plastic with amazing non-stick properties.\u003c\/p\u003e\n\u003cp\u003eThanks to their small size and the innovative design of their ergonomic handle, they are easy to transport and use.\u003c\/p\u003e\n\u003cp\u003eVarious textures are available, making them compatible with different modeling scales. The textures are scalable to cover large areas, and thanks to their handle, they allow for texturing that creates curves, adding more realism to the model or base.\u003c\/p\u003e\n\u003cp\u003eRoller width: 4 cm (1.5 inches)\u003cbr\u003eRoller length with handle: 14 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003cbr\u003eScale: 54mm-Military (1\/35-1\/32)\u003c\/p\u003e\n\u003cp\u003e* The textured rolling pins and their handles are presented unassembled.\u003cbr\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay, modeling compounds, properly until ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Roll out the putty\/clay, modeling compounds. For better results, smooth the material. \u003cstrong\u003e* We recommend using a flat rolling pin, without texture, for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent sticking.\u003cbr\u003e4. - Move the roller with consistent pressure at points to ensure a continuous texture.\u003cbr\u003e5. - Cut off the excess material at the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eUsually, modeling with these rolling pins and polymer clay (Fimo or Sculpey type) is quite easy, as polymer clay allows for easy correction of mistakes due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model along with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will lightly resemble the smell of toast.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage with these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the material with a little water before imprinting the texture.\u003cbr\u003eAlso, talcum powder, or even directly applied modeling petroleum jelly, can reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput \/ Magic Sculpt \/ Aves Apoxie Sculpt modeling compounds, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the material should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of a responsible adult when in use.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092130547,"sku":"124301","price":8.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124301-strukturierte-walze-mit-griff-kopfsteinpflaster-gs-10484-1.webp?v=1781203403"},{"product_id":"strukturierte-walze-mit-griff-kleine-kopfsteinpflaster","title":"Textured roller with handle - Small cobblestones","description":"\u003ch2\u003eTextured Rolling Pin With Handle - Small Cobblestone\u003c\/h2\u003e\n\u003cp\u003eTextured Rolling Pin With Handle - Small Cobblestone\u003c\/p\u003e\n\u003cp\u003eTextured rolling pin with handle that can imprint a continuous, repeating pattern on all kinds of modeling putties, polymer clays, and pastes.\u003cbr\u003eMade of clear PMMA plastic with amazing non-stick properties.\u003c\/p\u003e\n\u003cp\u003eThanks to their small size and the innovative design of their ergonomic handle, they are easy to transport and use.\u003c\/p\u003e\n\u003cp\u003eVarious textures are available, making them compatible with different modeling scales. The textures are scalable to cover large areas, and thanks to their handle, they allow for embossing textures that create curves to add more realism to the model or base.\u003c\/p\u003e\n\u003cp\u003eRoller width: 4 cm (1.5 inches)\u003cbr\u003eRoller length with handle: 14 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003cbr\u003eScale: 28-32mm (1\/64-1\/48)\u003c\/p\u003e\n\n\u003cp\u003e* The textured rolling pins and their handles are supplied unassembled.\u003cbr\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay, modeling compounds, thoroughly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay, modeling compounds. For best results, smooth the material. \u003cstrong\u003e* We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent sticking.\u003cbr\u003e4. - Move the roller with consistently even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material at the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly onto the bases and then bake the model together with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will lightly smell like toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the material with a little water before imprinting the texture.\u003cbr\u003eTalcum powder, or even directly applied modeling petroleum jelly, can also reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, such as Milliput \/ Magic Sculpt \/ Aves Apoxie Sculpt modeling compounds, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the material should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of a responsible adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092163315,"sku":"124302","price":8.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124302-strukturierte-walze-mit-griff-kleine-kopfsteinpflaster-gs-10483-1.webp?v=1781203406"},{"product_id":"strukturierte-walze-mit-griff-kopfsteinpflaster-15mm","title":"Textured roller with handle - cobblestones 15mm","description":"\u003ch2\u003eTextured Rolling Pin With Handle - Cobblestone 15mm\u003c\/h2\u003e\n\u003cp\u003eTextured Rolling Pin With Handle - Cobblestone 15mm\u003c\/p\u003e\n\u003cp\u003eTextured rolling pin with handle that can impress a continuous, repeating pattern on all types of modeling putty, polymer clays, and pastes.\u003cbr\u003eMade from clear PMMA plastic with amazing non-stick properties.\u003c\/p\u003e\n\u003cp\u003eThanks to their small size and the innovative design of their ergonomic handle, they are easy to transport and use.\u003c\/p\u003e\n\u003cp\u003eVarious textures are available, making them compatible with different modeling scales. The textures are scalable to cover large areas, and thanks to their handle, they allow for embossing textures that create curves to add more realism to the model or base.\u003c\/p\u003e\n\u003cp\u003eRoller width: 4 cm (1.5 inches)\u003cbr\u003eRoller length with handle: 14 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003cbr\u003eScale: 15-20mm (1\/87-1\/72)\u003c\/p\u003e\n\u003cp\u003e* The textured rolling pins and their handles are supplied unassembled.\u003cbr\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Properly mix the putty\/clay, modeling compounds, until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay, modeling compounds. For best results, smooth the mass. \u003cstrong\u003e* We recommend using a flat rolling pin, without texture, for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to avoid sticking.\u003cbr\u003e4. - Move the roller with punctual, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material at the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the correct technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model and MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will subtly smell like toast.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the mass with a little water before impressing the texture.\u003cbr\u003eTalc powder, or even directly applied modeling petroleum jelly, can also reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput \/ Magic Sculpt \/ Aves Apoxie Sculpt modeling compounds, can also be used. However, these should not be moistened as it unnecessarily complicates the work. If Milliput appears too sticky, the mass should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of a responsible adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092196083,"sku":"124303","price":8.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124303-strukturierte-walze-mit-griff-kopfsteinpflaster-15mm-gs-10482-1.webp?v=1781203410"},{"product_id":"strukturierte-walze-mit-griff-kleine-hollandische-ziegel","title":"Textured Roller with Handle - Small Dutch Bricks","description":"\u003ch2\u003eTextured Roller With Handle - Small Dutch Bricks\u003c\/h2\u003e\n\u003cp\u003eTextured Roller With Handle - Small Dutch Bricks\u003c\/p\u003e\n\u003cp\u003eTextured roller with handle that can press a continuous, repeating pattern onto all types of modeling putty, polymer clays, and pastes.\u003cbr\u003eMade from clear PMMA plastic with amazing non-stick properties.\u003c\/p\u003e\n\u003cp\u003eThanks to their small size and the innovative design of their ergonomic handle, they are easy to transport and use.\u003c\/p\u003e\n\u003cp\u003eVarious textures are available, making them compatible with different modeling scales. The textures are scalable to cover large areas, and thanks to their handle, they allow for embossing textures that create curves to add more realism to the model or base.\u003c\/p\u003e\n\u003cp\u003eRoller width: 4 cm (1.5 inches)\u003cbr\u003eRoller length with handle: 14 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003cbr\u003eScale: 28-32mm (1\/64-1\/48)\u003c\/p\u003e\n\u003cp\u003e* The textured rolling pins and their handles are supplied unassembled.\u003cbr\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay, modeling compounds, thoroughly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay, modeling compounds. For best results, smooth the mass. \u003cstrong\u003e* We recommend using a flat rolling pin, without texture, for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to avoid sticking.\u003cbr\u003e4. - Move the roller with intermittently even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material on the sides with a sharp knife. We recommend allowing the material to dry beforehand.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eUsually, modeling with these rolling pins and polymer clay (Fimo or Sculpey type) is quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will lightly resemble the smell of toast.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the mass with a little water before impressing the texture.\u003cbr\u003eAlso, talcum powder, or even directly applied modeling petroleum jelly, can reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput \/ Magic Sculpt \/ Aves Apoxie Sculpt modeling compounds, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the mass should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of a responsible adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092228851,"sku":"124305","price":8.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124305-strukturierte-walze-mit-griff-kleine-hollandische-ziegel-gs-10489-1.webp?v=1781203413"},{"product_id":"strukturierte-walze-mit-griff-kleine-steinfliesenboden","title":"Textured Roller with Handle - Small Stone Tile Floor","description":"\u003ch2\u003eTextured Roller with Handle - Small Stone Pavement\u003c\/h2\u003e\n\u003cp\u003eTextured Roller with Handle - Small Stone Pavement\u003c\/p\u003e\n\u003cp\u003eTextured roller with handle that can press a continuous, repeating pattern onto all types of modeling putty, polymer clays, and pastes.\u003cbr\u003eMade from clear PMMA plastic with amazing non-stick properties.\u003c\/p\u003e\n\u003cp\u003eThanks to their small size and the innovative design of their ergonomic handle, they are easy to transport and use.\u003c\/p\u003e\n\u003cp\u003eVarious textures are available, making them compatible with different modeling scales. The textures are scalable to cover large areas, and thanks to their handle, they allow for texturing that creates curves to add more realism to the model or base.\u003c\/p\u003e\n\u003cp\u003eRoller width: 4 cm (1.5 inches)\u003cbr\u003eRoller length with handle: 14 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003cbr\u003eScale: 28-32mm (1\/64-1\/48)\u003c\/p\u003e\n\u003cp\u003e* The textured rolling pins and their handles are supplied unassembled.\u003cbr\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay, modeling compounds, correctly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay, modeling compounds. For best results, smooth the compound. \u003cstrong\u003e* We recommend using a flat rolling pin, without texture, for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking.\u003cbr\u003e4. - Move the roller with consistent, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off any excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eUsually, modeling with these rolling pins and polymer clay (Fimo or Sculpey type) is quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will lightly resemble the smell of toast.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage with these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the compound with some water before impressing the texture.\u003cbr\u003eAlso, talcum powder, or even directly applied modeling petroleum jelly, can reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput \/ Magic Sculpt \/ Aves Apoxie Sculpt modeling compounds, can also be used. However, these should not be moistened as it unnecessarily complicates the work. If Milliput appears too sticky, the compound should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of a responsible adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092523763,"sku":"124306","price":8.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124306-strukturierte-walze-mit-griff-kleine-steinfliesenboden-gs-10492-1.webp?v=1781203415"},{"product_id":"strukturwalze-far-galaxy","title":"Texture roller - Far Galaxy","description":"\u003ch2\u003eTextured Roller - Far Galaxy\u003c\/h2\u003e\n\u003cp\u003eTextured Roller - Far Galaxy\u003c\/p\u003e\n\u003cp\u003eTextured rollers that can be used to imprint a permanent, repeated pattern onto clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The textured rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling compound correctly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling compound. For best results, smooth the mass. We recommend using a plain, smooth rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent sticking.\u003cbr\u003e4. - Move the roller with consistent pressure at various points to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will lightly smell of toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the mass with a little water before imprinting the texture.\u003cbr\u003eTalcum powder, or even directly applied modeling petroleum jelly (LINK), can also reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g. Milliput modeling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the mass should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using the product.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092556531,"sku":"124307","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124307-strukturwalze-far-galaxy-gs-3505-1.webp?v=1781203418"},{"product_id":"strukturwalze-norsemen","title":"Texturing roller - Norsemen","description":"\u003ch2\u003eTextured Rolling Pin - Norsemen\u003c\/h2\u003e\n\u003cp\u003eTextured Rolling Pin - Norsemen\u003c\/p\u003e\n\u003cp\u003eTextured rolling pins that can be used to imprint a permanent, repeating pattern on clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The textured rolling pins are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling clay thoroughly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling clay. For best results, smooth the material. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the rolling pin to prevent sticking.\u003cbr\u003e4. - Move the rolling pin with consistent pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off the excess material at the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will have a slight smell of toast.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage of these materials is that they do not need to be fired, but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the rolling pin or the material with a little water before imprinting the texture.\u003cbr\u003eAlso, talcum powder, or even directly applied modeling petroleum jelly (LINK), can reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling clays, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the material should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the rolling pin, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be supervised by an adult when using the product.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092589299,"sku":"124308","price":14.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124308-strukturwalze-norsemen-gs-3410-1.webp?v=1781203423"},{"product_id":"strukturwalze-arkan","title":"Textured roller - Arkan","description":"\u003ch2\u003eTexture Roller - Arkan\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Arkan\u003c\/p\u003e\n\u003cp\u003eTexture rollers designed to emboss a permanent, repeatable pattern onto clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The texture rollers come in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling material correctly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling material. For better results, smooth the material. We recommend using a smooth, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking.\u003cbr\u003e4. - Move the roller with consistently even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material from the sides with a sharp knife. We recommend allowing the material to dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these texture rollers and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will lightly resemble the smell of toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the material with a little water before embossing the texture.\u003cbr\u003eAlso, talcum powder, or even directly applied modeling petroleum jelly (LINK), can reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling compounds, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the material should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be supervised by an adult when using the product.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092622067,"sku":"124309","price":14.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124309-strukturwalze-arkan-gs-3411-1.webp?v=1781203428"},{"product_id":"strukturwalze-abtei-der-templer","title":"Texture roller - Abbey of the Templars","description":"\u003ch2\u003eTexture Roller - Abbey of the Templars\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Abbey of the Templars\u003c\/p\u003e\n\u003cp\u003eTexture rollers with which a permanent, repeated pattern can be embossed on clay and other putties. Made from clear, non-toxic PMMA plastic with amazing non-piercing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling compound properly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Roll out the putty\/clay\/modeling compound. For best results, smooth the compound. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent sticking.\u003cbr\u003e4. - Move the roller with evenly distributed pressure to ensure a continuous texture.\u003cbr\u003e5. - Trim excess material from the sides with a sharp knife. We recommend allowing the material to dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model along with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will lightly resemble the smell of toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the compound with a little water before impressing the texture.\u003cbr\u003eTalk powder, or even directly applied modeling petroleum jelly (LINK), can also reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g. Milliput modeling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the compound should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092654835,"sku":"124310","price":14.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124310-strukturwalze-abtei-der-templer-gs-2987-1.webp?v=1781203432"},{"product_id":"strukturwalze-regio-draco","title":"Texturing roller - Regio Draco","description":"\u003ch2\u003eTexture Roller - Regio Draco\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Regio Draco\u003c\/p\u003e\n\u003cp\u003eTexture rollers designed to impress a permanent, repeatable pattern onto clay and other putties. Made from clear, non-toxic PMMA plastic with astonishing non-piercing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Properly mix the putty\/clay\/modelling compounds until ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modelling compounds. For best results, smooth the mass. We recommend using a plain rolling pin, without texture, for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking.\u003cbr\u003e4. - Move the roller with consistent point pressure to ensure continuous texture.\u003cbr\u003e5. - Cut off excess material on the sides with a sharp knife. We recommend allowing the material to dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, all of which can be textured with the right technique.\u003cbr\u003eModelling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly onto the bases and then bake the model together with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will slightly resemble the smell of toast.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the mass with a little water before impressing the texture.\u003cbr\u003eTalk powder, or even directly applied modelling petroleum jelly (LINK), can also reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modelling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the mass should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092687603,"sku":"124311","price":14.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124311-strukturwalze-regio-draco-gs-2986-1.webp?v=1781203437"},{"product_id":"strukturwalze-elfisch","title":"Texture roller - Elfisch","description":"\u003ch2\u003eTexture Roller - Elven\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Elven\u003c\/p\u003e\n\u003cp\u003eTexture rollers used to imprint a lasting, repeated pattern on clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14'50 cm (5.5 inches)\u003cbr\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling material properly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread the putty\/clay\/modeling material. For best results, smooth the material. We recommend using a flat rolling pin, without texture, for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to avoid sticking to the roller.\u003cbr\u003e4. - Move the roller with consistently even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off the excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rollers and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will slightly smell like toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be fired but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the material with a little water before impressing the texture.\u003cbr\u003eTalk powder, or even directly applied modeling petroleum jelly (LINK), can also reduce the stickiness of Greenstuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling compounds, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput seems too sticky, the material should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092720371,"sku":"124312","price":14.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124312-strukturwalze-elfisch-gs-2387-1.webp?v=1781203442"},{"product_id":"strukturwalze-steinfliesenboden-15mm","title":"Textured roller - stone tile floor 15mm","description":"\u003ch2\u003eTexture Roller - Stone Tile Floor 15mm\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Stone Tile Floor 15mm\u003c\/p\u003e\n\u003cp\u003eTexture rollers that can be used to emboss a permanent, repeating pattern onto clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modelling compounds correctly until ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modelling compounds. For best results, smooth out the mass. We recommend using a smooth, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking.\u003cbr\u003e4. - Move the roller with uniform, intermittent pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material at the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModelling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will have a slight smell reminiscent of toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the mass with a little water before embossing the texture.\u003cbr\u003eTalc powder, or even directly applied modelling petroleum jelly (LINK), can also reduce the stickiness of the Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modelling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the mass should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092753139,"sku":"124313","price":14.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124313-strukturwalze-steinfliesenboden-15mm-gs-2950-1.webp?v=1781203447"},{"product_id":"strukturwalze-zwergisch","title":"Texture roller - Dwarfish","description":"\u003ch2\u003eTexture Roller - Dwarven\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Dwarven\u003c\/p\u003e\n\u003cp\u003eTexture rollers with which a permanent, repeated pattern can be embossed on clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling compound properly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling compound. For best results, smooth the compound. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking.\u003cbr\u003e4. - Move the roller with uniform, punctual pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off the excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then fire the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will lightly resemble the smell of toast.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be fired but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the compound with a little water before embossing the texture.\u003cbr\u003eThe stickiness of Green Stuff can also be reduced with talcum powder, or even directly applied modeling petroleum jelly (LINK).\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the compound should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092818675,"sku":"124314","price":13.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124314-strukturwalze-zwergisch-gs-2386-1.webp?v=1781203450"},{"product_id":"strukturwalze-riffelblech-klein","title":"Structure roller - checker plate - small","description":"\u003ch2\u003eTexture Roller - Checker Plate - Small\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Checker Plate - Small\u003c\/p\u003e\n\u003cp\u003eTexture rollers which can be used to repeatedly stamp a pattern onto clay and other putties. Made from clear, non-toxic PMMA plastic with amazing non-piercing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling paste correctly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling paste. For best results, smooth the paste. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to avoid sticking to the roller.\u003cbr\u003e4. - Move the roller with uniform pressure at specific points to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model including the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will lightly resemble the smell of toast.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked, but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the mass with a little water before impressing the texture.\u003cbr\u003eAlso with talcum powder, or even directly applied modeling vaseline (LINK), the stickiness of the Green Stuff can be reduced.\u003cbr\u003eOther epoxy putties, e.g. Milliput modeling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput seems too sticky, the mass should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092884211,"sku":"124315","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124315-strukturwalze-riffelblech-klein-gs-2510-1.webp?v=1781203455"},{"product_id":"strukturwalze-steampunk","title":"Texture roller - Steampunk","description":"\u003ch2\u003eTexture Roller - Steampunk\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Steampunk\u003c\/p\u003e\n\u003cp\u003eTexture rollers which can be used to impress a permanent, repeatable pattern onto clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-puncturing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling compound properly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling compound. For better results, smooth the mass. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking.\u003cbr\u003e4. - Move the roller with consistent, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material at the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rollers and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly onto the bases and then bake the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will lightly resemble the smell of toast.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the mass with a little water before impressing the texture.\u003cbr\u003eAlso, talcum powder, or even directly applied modeling vaseline (LINK), can reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the mass should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using the product.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018092982515,"sku":"124316","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124316-strukturwalze-steampunk-gs-2190-1.webp?v=1781203460"},{"product_id":"strukturwalze-riffelblech","title":"Textured roller - checker plate","description":"\u003ch2\u003eTexture Roller - Chequer Plate\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Chequer Plate\u003c\/p\u003e\n\u003cp\u003eTexture rollers that can be used to imprint a lasting, repeatable pattern onto clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modelling compounds properly until ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modelling compounds. For better results, smooth out the material. We recommend using a flat, non-textured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent sticking.\u003cbr\u003e4. - Move the roller with consistent, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material at the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModelling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will lightly resemble the smell of toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be fired but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the material with some water before imprinting the texture.\u003cbr\u003eThe stickiness of Green Stuff can also be reduced with talcum powder, or even directly applied modelling petroleum jelly (LINK).\u003cbr\u003eOther epoxy putties, e.g., Milliput modelling compounds, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the material should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scrubbing brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using the roller.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093015283,"sku":"124317","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124317-strukturwalze-riffelblech-gs-2509-1.webp?v=1781203465"},{"product_id":"strukturwalze-panzer","title":"Structure roller - tank","description":"\u003ch2\u003eTextured Rolling Pin - Tank\u003c\/h2\u003e\n\u003cp\u003eTextured Rolling Pin - Tank\u003c\/p\u003e\n\u003cp\u003eTextured rolling pins for creating a permanent, repeated pattern on clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The textured rolling pins are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling compound properly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling compound. For better results, smooth the compound. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the rolling pin to prevent it from sticking.\u003cbr\u003e4. - Move the rolling pin with consistently even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off the excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will have a slight smell reminiscent of toast.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the rolling pin or the compound with a little water before impressing the texture.\u003cbr\u003eThe stickiness of Green Stuff can also be reduced with talcum powder, or even directly applied modeling petroleum jelly (LINK).\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the compound should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the rolling pin, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using this product.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093048051,"sku":"124318","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124318-strukturwalze-panzer-gs-2304-1.webp?v=1781203470"},{"product_id":"strukturwalze-atlantis","title":"Texturing roller - Atlantis","description":"\u003ch2\u003eTexture Roller - Atlantis\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Atlantis\u003c\/p\u003e\n\u003cp\u003eTexture rollers which can be used to imprint a lasting, repetitive pattern on clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling compound properly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling compound. For best results, smooth the compound. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking to the roller.\u003cbr\u003e4. - Move the roller with consistent, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off any excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these texture rollers and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will have a slight smell of toast.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage of these materials is that they do not need to be fired but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the compound with a little water before imprinting the texture.\u003cbr\u003eAlso, talcum powder, or even directly applied modeling vaseline (LINK), can reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the compound should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using the product.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093080819,"sku":"124319","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124319-strukturwalze-atlantis-gs-2502-1.webp?v=1781203475"},{"product_id":"strukturwalze-chinesisch","title":"Texture roller - Chinese","description":"\u003ch2\u003eTextured Roller - Chinese\u003c\/h2\u003e\n\u003cp\u003eTextured Roller - Chinese\u003c\/p\u003e\n\u003cp\u003eTextured rollers that can imprint a permanent, repeating pattern onto clay and other putties. Made from clear, non-toxic PMMA plastic with amazing non-piercing properties. The textured rollers come in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling material properly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling material. For best results, smooth the material. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking to the roller.\u003cbr\u003e4. - Move the roller with consistent, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off the excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wooden bases. It is possible to texture the material directly onto the bases and then bake the model along with the MDF wooden bases in the oven at 150ºC for 15 minutes. The MDF wooden bases will not burn and will lightly resemble the smell of toast.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the material with a little water before imprinting the texture.\u003cbr\u003eAlso, talcum powder, or even directly applied modeling petroleum jelly (LINK), can reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling material, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the material should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093113587,"sku":"124320","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124320-strukturwalze-chinesisch-gs-2167-1.webp?v=1781203480"},{"product_id":"strukturwalze-vampire","title":"Texture roller - Vampire","description":"\u003ch2\u003eTexture Roller - Vampire\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Vampire\u003c\/p\u003e\n\u003cp\u003eTexture rollers designed to emboss a permanent, repeatable pattern onto clay and other putties. Made from clear, non-toxic PMMA plastic with amazing non-piercing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling paste correctly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling paste. For better results, smooth the material. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking.\u003cbr\u003e4. - Move the roller with consistently even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off the excess material at the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rollers and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then fire the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will subtly remind you of the smell of toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be fired but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the material with a little water before embossing the texture.\u003cbr\u003eAlso, talcum powder or even directly applied modeling petroleum jelly (LINK) can reduce the stickiness of the Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling compounds, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the material should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be supervised by an adult when in use.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093146355,"sku":"124321","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124321-strukturwalze-vampire-gs-2461-1.webp?v=1781203485"},{"product_id":"strukturwalze-arabisch","title":"Texture roller - Arabic","description":"\u003ch2\u003eTextured Rolling Pin - Arabic\u003c\/h2\u003e\n\u003cp\u003eTextured Rolling Pin - Arabic\u003c\/p\u003e\n\u003cp\u003eTextured rolling pins that can be used to impress a permanent, repeatable pattern onto clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The textured rolling pins are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling paste properly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling paste. For best results, smooth the material. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking.\u003cbr\u003e4. - Move the roller with punctual, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eUsually, modeling with these rolling pins and polymer clay (Fimo or Sculpey type) is quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will slightly smell like toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the material with a little water before impressing the texture.\u003cbr\u003eTalk powder, or even directly applied modeling vaseline (LINK), can also reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling pastes, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the material should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the used material.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093441267,"sku":"124322","price":14.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124322-strukturwalze-arabisch-gs-2166-1.webp?v=1781203490"},{"product_id":"strukturwalze-pflastersteine-15mm","title":"Textured roller - paving stones 15mm","description":"\u003ch2\u003eTexture Roller - Cobblestones 15mm\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - COBBLESTONES 15mm\u003c\/p\u003e\n\u003cp\u003eTexture rollers capable of impressing a permanent, repetitive pattern on clay and putty. Made from clear PMMA plastic with amazing non-piercing properties. It is non-toxic. They come in several different textures depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14'50 cm (5'5 inches)\u003cbr\u003eDiameter: 2'5cm (1 inch)\u003cbr\u003ePattern Size: 1-4mm (variable with several cobblestone types, all of them different)\u003cbr\u003eRecommended Scale: 1\/144 - 1\/100 - 1\/72 (12-15-20mm)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003c\/p\u003e\n\u003cp\u003e1. - Mix the putty\/clay, modeling compounds, correctly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay, modeling compounds. For best results, smooth the compound. \u003cstrong\u003e* We recommend using a flat rolling pin, without texture, for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking to the roller.\u003cbr\u003e4. - Move the roller with evenly applied pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off any excess material at the sides with a sharp knife. We recommend allowing the material to dry beforehand.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003c\/p\u003e\n\u003cp\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will lightly smell like toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage of these materials is that they do not need to be fired but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the compound with a little water before impressing the texture.\u003cbr\u003eAlso, talcum powder, or even directly applied modeling petroleum jelly (LINK), can reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the compound should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003c\/p\u003e\n\u003cp\u003eAfter using the roller, it should be cleaned with a scratching brush (LINK) and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003c\/p\u003e\n\u003cp\u003eChildren should always be in the presence of a responsible adult when using the product.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093474035,"sku":"124323","price":13.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124323-strukturwalze-pflastersteine-15mm-gs-2410-1.webp?v=1781203496"},{"product_id":"strukturwalze-mandala","title":"Texture roller - Mandala","description":"\u003ch2\u003eTextured Rolling Pin - Mandala\u003c\/h2\u003e\n\u003cp\u003eTextured Rolling Pin - Mandala\u003c\/p\u003e \n\u003cp\u003eTextured rolling pins that can impress a permanent, repetitive pattern on clay and other putties. Made from clear, non-toxic PMMA plastic with amazing non-puncturing properties. The textured rolling pins are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14'50 cm (5'5 inches)\u003cbr\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling material correctly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling material. For best results, smooth the material. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the rolling pin to prevent sticking.\u003cbr\u003e4. - Move the rolling pin with consistent pressure at specific points to ensure a continuous texture.\u003cbr\u003e5. - Cut off the excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will have a slight smell reminiscent of toast.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the rolling pin or the material with a little water before impressing the texture.\u003cbr\u003eAlso, with talcum powder, or even directly applied modeling petroleum jelly (LINK), the stickiness of Green Stuff can be reduced.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling materials, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the material should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the rolling pin, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093506803,"sku":"124324","price":13.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124324-strukturwalze-mandala-gs-1999-1.webp?v=1781203503"},{"product_id":"strukturwalze-romisch","title":"Structure roller - Roman","description":"\u003ch2\u003eTexture Roller - Roman\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Roman\u003c\/p\u003e\n\u003cp\u003eTexture rollers that can be used to impress a permanent, repetitive pattern onto clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-stick properties. Texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14'50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling material thoroughly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling material. For best results, smooth the material. We recommend using a smooth, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking to the roller.\u003cbr\u003e4. - Move the roller with consistent, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material on the sides with a sharp knife. We recommend allowing the material to dry beforehand.\u003c\/p\u003e\n\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then fire the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will have a slight smell reminiscent of toast.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be fired and can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the material with a little water before impressing the texture.\u003cbr\u003eTalc powder, or even directly applied modeling petroleum jelly (LINK), can also reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the material should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093539571,"sku":"124325","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124325-strukturwalze-romisch-gs-1993-1.webp?v=1781203509"},{"product_id":"strukturwalze-pflastersteine","title":"Textured roller - paving stones","description":"\u003ch2\u003eTextured Rolling Pin - Cobblestones\u003c\/h2\u003e\n\u003cp\u003eTextured Rolling Pin - Cobblestones\u003c\/p\u003e\n\u003cp\u003eTextured rolling pins that can be used to imprint a lasting, repetitive pattern onto clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The textured rolling pins are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling compound properly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling compound. For best results, smooth the compound. We recommend using a flat, smooth rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the rolling pin to prevent it from sticking.\u003cbr\u003e4. - Move the rolling pin with consistent, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material at the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model, along with the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will have a slight smell reminiscent of toast.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the rolling pin or the compound with a little water before imprinting the texture.\u003cbr\u003eTalcum powder, or even directly applied modeling vaseline (LINK), can also reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling compounds, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the compound should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the rolling pin, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093572339,"sku":"124326","price":14.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124326-strukturwalze-pflastersteine-gs-1994-1.webp?v=1781203516"},{"product_id":"strukturwalze-eldar","title":"Structural roller - Eldar","description":"\u003ch2\u003eTexture Roller - Eldar\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Eldar\u003c\/p\u003e\n\u003cp\u003eTexture rollers designed to emboss a permanent, repeatable pattern onto clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The texture rollers come in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling material thoroughly until ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling material. For best results, smooth the material. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking.\u003cbr\u003e4. - Move the roller with consistent, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material at the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these texture rollers and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly onto the bases and then bake the model along with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will slightly resemble the smell of toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be fired but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the material with a little water before impressing the texture.\u003cbr\u003eAlso, talcum powder, or even directly applied modeling petroleum jelly (LINK), can reduce the stickiness of the Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput seems too sticky, the material should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093605107,"sku":"124327","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124327-strukturwalze-eldar-gs-1683-1.webp?v=1781203521"},{"product_id":"strukturwalze-necrons","title":"Structure Roller - Necrons","description":"\u003ch2\u003eTextured Rolling Pin - Necrons\u003c\/h2\u003e\n\u003cp\u003eTextured Rolling Pin - Necrons\u003c\/p\u003e\n\u003cp\u003eTextured rolling pins used to impress a continuous repeated pattern onto clay and other putties. Made from clear, non-toxic PMMA plastic with amazing non-piercing properties. The textured rolling pins are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling compound properly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling compound. For best results, smooth the compound. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the rolling pin to prevent sticking.\u003cbr\u003e4. - Move the rolling pin with consistent, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model, along with the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will have a slight smell reminiscent of toast.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the rolling pin or the compound with a little water before impressing the texture.\u003cbr\u003eTalk powder, or even directly applied modeling petroleum jelly (LINK), can also reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling compounds, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the compound should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the rolling pin, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093670643,"sku":"124328","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124328-strukturwalze-necrons-gs-1681-1.webp?v=1781203527"},{"product_id":"strukturwalze-tau","title":"Textured roller - Tau","description":"\u003ch2\u003eTexture Roller - Rope\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Rope\u003c\/p\u003e\n\u003cp\u003eTexture rollers used to imprint a permanent, repeating pattern onto clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-puncturing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Properly mix the putty\/clay\/modeling compound until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling compound. For best results, smooth the mass. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking.\u003cbr\u003e4. - Move the roller with consistent, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for hardening.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will only slightly smell like toast.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the mass with a little water before imprinting the texture.\u003cbr\u003eTalk powder, or even directly applied modeling petroleum jelly (LINK), can also reduce the stickiness of Greenstuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the mass should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scrubbing brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093703411,"sku":"124329","price":13.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124329-strukturwalze-tau-gs-1682-1.webp?v=1781203533"},{"product_id":"strukturwalze-fischgratpflaster","title":"Textured roller - herringbone paving","description":"\u003ch2\u003eTexture Roller - Herringbone Pavement\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Herringbone Pavement\u003c\/p\u003e\n\u003cp\u003eTexture rollers designed to imprint a permanent, repeating pattern onto clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-stick properties. These texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling paste thoroughly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling paste. For best results, smooth the mass. We recommend using a smooth, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking.\u003cbr\u003e4. - Move the roller with consistent, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off any excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rollers and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then fire the model, along with the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will only lightly smell like toast.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage of these materials is that they do not need to be fired but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the mass with a little water before imprinting the texture.\u003cbr\u003eTalk powder, or even directly applied modeling petroleum jelly (LINK), can also reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, such as Milliput modeling clays, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the mass should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be supervised by an adult during use.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093736179,"sku":"124330","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124330-strukturwalze-fischgratpflaster-gs-1675-1.webp?v=1781203541"},{"product_id":"strukturwalze-steinfliesenboden","title":"Textured roller - stone tile floor","description":"\u003ch2\u003eTextured Rolling Pin - Stone Pavement\u003c\/h2\u003e\n\u003cp\u003eTextured Rolling Pin - Stone Pavement\u003c\/p\u003e\n\u003cp\u003eTextured rolling pins designed to imprint a permanent, repeated pattern onto clay and other putties. Made from clear, non-toxic PMMA plastic with amazing non-stick properties. Textured rolling pins are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Properly mix the putty\/clay\/modeling compound until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling compound. For best results, smooth the compound. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the rolling pin to prevent sticking.\u003cbr\u003e4. - Move the rolling pin with consistently even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material at the sides with a sharp knife. We recommend allowing the material to dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly onto the bases and then bake the model, along with the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will have a slight smell reminiscent of toast.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the rolling pin or the compound with a little water before imprinting the texture.\u003cbr\u003eThe stickiness of Greenstuff can also be reduced with talcum powder, or even directly applied modeling petroleum jelly (LINK).\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the compound should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND MAINTENANCE:\u003cbr\u003eAfter using the rolling pin, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be supervised by an adult during use.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093768947,"sku":"124331","price":14.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124331-strukturwalze-steinfliesenboden-gs-1676-1.webp?v=1781203548"},{"product_id":"strukturwalze-alien-hive","title":"Texture roller - Alien Hive","description":"\u003ch2\u003eTexture Roller - Alien Hive\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Alien Hive\u003c\/p\u003e\n\u003cp\u003eTexture rollers designed to emboss a permanent, repeated pattern onto clay and other putties. Made from clear, non-toxic PMMA plastic with amazing non-piercing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modelling paste thoroughly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modelling paste. For best results, smooth the material. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking.\u003cbr\u003e4. - Move the roller with consistent, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material at the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModelling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then fire the model, including the MDF wood bases, in the oven at 150°C for 15 minutes. The MDF wood bases will not burn and will only have a slight smell reminiscent of toast.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage of these materials is that they do not need to be fired but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the material with a little water before embossing the texture.\u003cbr\u003eTalk powder, or even directly applied modelling petroleum jelly (LINK), can also reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modelling pastes, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the mass should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using the product.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093801715,"sku":"124332","price":14.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124332-strukturwalze-alien-hive-gs-1664-1.webp?v=1781203554"},{"product_id":"strukturwalze-kleine-hollandische-ziegel","title":"Texturing roller - Small Dutch bricks","description":"\u003ch2\u003eTexture Roller - Small Dutch Brick\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Small Dutch Brick\u003c\/p\u003e\n\u003cp\u003eTexture rollers with which a permanent, repeated pattern can be embossed on clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling compound properly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling compound. For best results, smooth the compound. We recommend using a flat rolling pin, without texture, for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to avoid sticking to the roller.\u003cbr\u003e4. - Move the roller with evenly distributed pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then fire the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will lightly resemble the smell of toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be fired, but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the compound with a little water before embossing the texture.\u003cbr\u003eAlso, talcum powder, or even directly applied modeling petroleum jelly (LINK), can reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the compound should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093834483,"sku":"124333","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124333-strukturwalze-kleine-hollandische-ziegel-gs-1660-1.webp?v=1781203559"},{"product_id":"strukturwalze-hollandische-ziegel-15mm","title":"Textured roller - Dutch brick 15mm","description":"\u003ch2\u003eTexture Roller - Dutch Bricks 15mm\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Dutch Bricks 15mm\u003c\/p\u003e\n\u003cp\u003eTexture rollers that can be used to emboss a permanent, repetitive pattern onto clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling clay properly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling clay. For best results, smooth the mass. We recommend using a flat rolling pin, without texture, for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking to the roller.\u003cbr\u003e4. - Move the roller with punctual, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off the excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will have a slight smell of toast.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage of these materials is that they do not need to be fired, but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the mass with a little water before embossing the texture.\u003cbr\u003eThe stickiness of the Green Stuff can also be reduced with talcum powder, or even directly applied modeling petroleum jelly (LINK).\u003cbr\u003eOther epoxy putties, e.g. Milliput modeling clays, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the mass should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when in use.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093867251,"sku":"124334","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124334-strukturwalze-hollandische-ziegel-15mm-gs-1626-1.webp?v=1781203566"},{"product_id":"strukturwalze-pflaster-15mm","title":"Textured roller - paving stones 15mm","description":"\u003ch2\u003eTexture Roller - Pavement 15mm\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Pavement 15mm\u003c\/p\u003e\n\u003cp\u003eTexture rollers that can be used to impress a permanent, repeatable pattern onto clay and other putties. Made from clear, non-toxic PMMA plastic with amazing non-piercing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling compound properly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling compound. For best results, smooth the compound. We recommend using a flat, non-textured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking.\u003cbr\u003e4. - Move the roller with evenly distributed pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off any excess material at the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model together with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will subtly smell like toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be fired, but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the compound with a little water before impressing the texture.\u003cbr\u003eAlso, talcum powder, or even directly applied modeling petroleum jelly (LINK), can reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the compound should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093900019,"sku":"124335","price":13.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124335-strukturwalze-pflaster-15mm-gs-1627-1.webp?v=1781203572"},{"product_id":"strukturwalze-kopfsteinpflaster-15mm","title":"Textured roller - cobblestones 15mm","description":"\u003ch2\u003eTexture Roller - Cobblestone 15mm\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Cobblestone 15mm\u003c\/p\u003e\n\u003cp\u003eTexture rollers that can be used to emboss a permanent, repetitive pattern on clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modelling compounds properly until ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modelling compounds. For better results, smooth out the mass. We recommend using a plain rolling pin, without texture, for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking.\u003cbr\u003e4. - Move the roller with uniform pressure at specific points to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModelling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then fire the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will lightly resemble the smell of toast.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage of these materials is that they do not need to be fired but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the mass with a little water before impressing the texture.\u003cbr\u003eAlso, talcum powder, or even directly applied modelling Vaseline (LINK), can reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g. Milliput modelling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the mass should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093932787,"sku":"124336","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124336-strukturwalze-kopfsteinpflaster-15mm-gs-1625-1.webp?v=1781203578"},{"product_id":"strukturwalze-wahnsinn-von-cthulhu","title":"Texture Roller - Madness of Cthulhu","description":"\u003ch2\u003eTexture Roller - Madness of Cthulhu\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Madness of Cthulhu\u003c\/p\u003e\n\u003cp\u003eTexture rollers that can be used to impress a continuously repeating pattern onto clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-penetrating properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling compound properly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling compound. For best results, smooth the compound. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to avoid sticking to it.\u003cbr\u003e4. - Move the roller with consistent, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off the excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, all of which can be textured with the right technique.\u003cbr\u003eModeling with these rollers and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model together with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will slightly resemble the smell of toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the compound with a little water before impressing the texture.\u003cbr\u003eThe stickiness of Green Stuff can also be reduced with talcum powder, or even directly applied modeling petroleum jelly (LINK).\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the compound should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093965555,"sku":"124337","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124337-strukturwalze-wahnsinn-von-cthulhu-gs-1604-1.webp?v=1781203585"},{"product_id":"strukturwalze-ancestral-recall","title":"Structure Roller - Ancestral Recall","description":"\u003ch2\u003eTextured Rolling Pin - Ancestral Recall\u003c\/h2\u003e\n\u003cp\u003eTextured Rolling Pin - Ancestral Recall\u003c\/p\u003e\n\u003cp\u003eTextured rolling pins that can impress a permanent, repeated pattern onto clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The textured rolling pins come in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling material properly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modeling material. For best results, smooth the material. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the rolling pin to prevent sticking.\u003cbr\u003e4. - Move the rolling pin with consistently even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material at the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model together with the MDF wood bases in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will have a slight smell of toast.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be baked but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the rolling pin or the material with a little water before impressing the texture.\u003cbr\u003eThe stickiness of Green Stuff can also be reduced with talcum powder, or even directly applied modeling petroleum jelly (LINK).\u003cbr\u003eOther epoxy putties, e.g. Milliput modeling compounds, can also be used. However, these should not be moistened, as it unnecessarily complicates the work. If Milliput appears too sticky, the material should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the rolling pin, it should be cleaned with a scrubbing brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using the product.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018093998323,"sku":"124338","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124338-strukturwalze-ancestral-recall-gs-1504-1.webp?v=1781203594"},{"product_id":"strukturwalze-kaschmir","title":"Texture roller - Cashmere","description":"\u003ch2\u003eTexture Roller - Cashmere\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Cashmere\u003c\/p\u003e\n\u003cp\u003eTexture rollers for imprinting a continuous, repeating pattern on clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-piercing properties. The texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modelling compound correctly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread out the putty\/clay\/modelling compound. For best results, smooth the compound. We recommend using a flat, smooth rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent sticking.\u003cbr\u003e4. - Move the roller with consistent, even pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off any excess material on the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModelling with these texture rollers and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will subtly remind you of toasted bread.\u003cbr\u003eIn the case of epoxy putties, there are various techniques to achieve similar results. The advantage of these materials is that they do not need to be fired but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the compound with a little water before imprinting the texture.\u003cbr\u003eThe stickiness of Greenstuff can also be reduced with talcum powder, or even directly applied modelling vaseline (LINK).\u003cbr\u003eOther epoxy putties, e.g. Milliput modelling compounds, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the compound should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter use, the roller should be cleaned with a scrubbing brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018094031091,"sku":"124339","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124339-strukturwalze-kaschmir-gs-1499-1.webp?v=1781203600"},{"product_id":"strukturwalze-gitter","title":"Textured roller - grid","description":"\u003ch2\u003eTexture Roller - Grid\u003c\/h2\u003e\n\u003cp\u003eTexture Roller - Grid\u003c\/p\u003e\n\u003cp\u003eTexture rollers designed to emboss a permanent, repeated pattern onto clay and other putties. Made from transparent, non-toxic PMMA plastic with amazing non-stick properties. Texture rollers are available in several different textures, depending on your specific needs.\u003c\/p\u003e\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003cbr\u003eDiameter: 2.5cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eINSTRUCTIONS FOR USE:\u003cbr\u003e1. - Mix the putty\/clay\/modeling paste correctly until it is ready according to the manufacturer's recommendations.\u003cbr\u003e2. - Spread the putty\/clay\/modeling paste. For best results, smooth the paste. We recommend using a flat, untextured rolling pin for this purpose.\u003cbr\u003e3. - Depending on the type of material, we recommend moistening the roller to prevent it from sticking.\u003cbr\u003e4. - Move the roller with uniform, intermittent pressure to ensure a continuous texture.\u003cbr\u003e5. - Cut off excess material at the sides with a sharp knife. We recommend letting the material dry beforehand.\u003c\/p\u003e\n\u003cp\u003eMATERIALS:\u003cbr\u003eThere are many different putties and types of clay on the market, and all can be textured with the right technique.\u003cbr\u003eModeling with these rolling pins and polymer clay (Fimo or Sculpey type) is usually quite easy, as polymer clay allows for easy error correction due to the heat required for curing.\u003cbr\u003eIf the goal is to model textured bases, we recommend using MDF wood bases. It is possible to texture the material directly on the bases and then bake the model, including the MDF wood bases, in the oven at 150ºC for 15 minutes. The MDF wood bases will not burn and will have a slight smell reminiscent of toast.\u003cbr\u003eIn the case of epoxy putties, there are different techniques to achieve similar results. The advantage of these materials is that they do not need to be fired, but can be textured directly.\u003cbr\u003eWhen using Green Stuff, which is particularly sticky, it is advisable to moisten the surface of the roller or the paste with a little water before impressing the texture.\u003cbr\u003eAlso, talcum powder, or even directly applied modeling vaseline (LINK), can reduce the stickiness of Green Stuff.\u003cbr\u003eOther epoxy putties, e.g., Milliput modeling pastes, can also be used. However, these should not be moistened, as this unnecessarily complicates the work. If Milliput appears too sticky, the paste should be kneaded until the stickiness subsides.\u003c\/p\u003e\n\u003cp\u003eCLEANING AND CARE:\u003cbr\u003eAfter using the roller, it should be cleaned with a scratching brush and plenty of water to remove any residue of the material used.\u003c\/p\u003e\n\u003cp\u003eSAFETY:\u003cbr\u003eChildren should always be in the presence of an adult when using.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Greenstuff World","offers":[{"title":"Default Title","offer_id":48018094063859,"sku":"124340","price":14.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/files\/124340-strukturwalze-gitter-gs-1421-1.webp?v=1781203605"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/8699\/8771\/collections\/green-stuff-world.webp?v=1783279466","url":"https:\/\/radaddel.de\/en\/collections\/green-stuff-world.oembed?page=6","provider":"Radaddel","version":"1.0","type":"link"}